Journal of Petroleum Geomechanics

Author Index

A

Abdollahian, Amirhossein Detection of permeable fractures by Stoneley waves in a hydrocarbon well in south of Iran [Volume 2, Issue 1, 2018, Pages 55-63]
Abdollahipour, Abolfazl Field design of hydraulic fracturing in a sandstone formation (Case study: A vertical well in Hugoton gas field in the USA) [Volume 1, Issue 2, 2017, Pages 1-21]
Abdollahipour, Abolfazl Stability analysis of a vertical wellbore in one of Iran's South-West oilfields using the plastic zone concept [Volume 2, Issue 1, 2018, Pages 18-40]
Abdollahipour, Abolfazl Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
Abdollahipour, Abolfazl Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2022, Pages 1-18]
Abdollahipour, Abolfazl Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
Abdollahipour, Abolfazl 3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
Abdollahpour, Pouya Finite element analysis to investigate the success probability of stress cage technology relative to regime of in-situ stresses for control of drilling fluid lost circulation [Volume 5, Issue 4, 2022, Pages 82-90]
Aftab, Saeed The effect of the number, dimensions and location of anomalies on the crosswell Traveltime tomography results [Volume 6, Issue 3, 2023, Pages 1-8]
Aghakhani Emamqeysi, Mohammad Reza Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
Aghakhani Emamqeysi, Mohammad Reza 3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
Ahmadi, Amir Introducing a strategy in recognition and simultaneous modelling of fractures with FMI logs and seismic data through reservoir zonation in a field from south of Iran [Volume 3, Issue 3, 2019, Pages 14-27]
Ahmadi, Mohammad Implementation of a new proxy algorithm in earth science - A case study: Automatic history matching in one of oil reservoirs [Volume 1, Issue 1, 2017, Pages 1-14]
Ahmadzadeh, Javad Investigating the creep behavior some gypsum and anhydrite rock samples of Gachsaran formation under room and sealrock temperature conditions [Volume 6, Issue 1, 2023, Pages 52-65]
Alimoradi, Andisheh Permeability Prediction from Log Data using Machine Learning Methods [(Articles in Press)]
Alimoradi, Andisheh Optimizing Deep Learning Models for Shear Wave Velocity Estimation Utilizing Petrophysical Logs: A Case Study on an Oil Reservoir in Southern Iran [(Articles in Press)]
Alizadeh, Hossein Correction Investigating the Design of Casing Pipes Using Drilling Data Analysis in Bangestan Wells, One of the Oil Fields in the Southwest of Iran [Volume 2, Issue 1, 2018, Pages 41-54]
Alizadeh Zakaria, Zahra The feasibility of using InSAR technique to measure land subsidence caused by petroleum extraction [Volume 6, Issue 1, 2023, Pages 66-77]
Amelsakhi, Masoud Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
Ameri, Mohamad Javad Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
Ameri, Mohammad javad Geomechanical Study of One of Iranian Reservoirs: From Mechanical Earth Modeling to Mud Window Prediction [(Articles in Press)]
Ameri, Mohammad Javad An Analytical Poroelastic Model to Study the LCM Performance during the Wellbore Strengthening [Volume 3, Issue 4, 2020, Pages 57-74]
Ameri Shahrabi, Mohammad Javad An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
Ameri Shahrabi, Mohammad Javad Assesment of self-killing as a blowout control method in deep water wells [Volume 5, Issue 2, 2022, Pages 17-33]
Ameri Shahrabi, Mohammad Javad Laboratory study of the effect of proppant operating variables on fracture conductivity under minimum horizontal stress conditions in one of the Iranian reservoirs [Volume 6, Issue 4, 2023, Pages 1-15]
Amini, Mohammad saeed numerical and analytical study of reservoir geomechanics model for underbalanced drilling in sandstone formations [Volume 5, Issue 2, 2022, Pages 34-47]
Amiri, Massih Making artificial sandstone with a wide range of porosities [Volume 2, Issue 1, 2018, Pages 85-99]
Amiri Kolajoobi, Rasool Implementing the teaching-learning based optimization algorithm to predict shear wave velocity from well logs in sandstone and carbonate case studies [Volume 1, Issue 2, 2017, Pages 86-99]
Anemangely, Mohammad Determination of Reservoir Drillability Index based on Drilling Penetration Rate in one oil well in south west of Iran [Volume 1, Issue 2, 2017, Pages 22-39]
Arab-Amiri, Alireza Geostatistical multiple-point modeling of heterogeneous facies of petroleum reservoirs in order to control of the sand production [Volume 3, Issue 2, 2019, Pages 28-43]
Arashi, Mohammad Upscaling of the geomechanics parameters of reservoir using the kernel function method with adaptive bandwidth and comparing with the results of wavelet transformation [Volume 2, Issue 2, 2019, Pages 40-54]
Arjmand, Yaser Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
Asali, Majid Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
Asef, Mohammad Reza Introducing an optimized procedure for estimation of porosity, using a combination well log data [Volume 5, Issue 1, 2022, Pages 82-91]
Asef, Mohammad Reza Contribution of porosity and clay content on shear wave velocity in shaly formations [Volume 6, Issue 2, 2023, Pages 40-47]
Aslani, Soleila Rock physics modeling in carbonate reservoirs- Review of theoretical models and a case study [Volume 3, Issue 4, 2020, Pages 90-108]
Ayatollahi, Shahab Improving drilling speed and cost reduction through risk management and well-trajectory design [Volume 1, Issue 1, 2017, Pages 29-39]
Azad, Ehsan Experimental Study of Fluid Loss Additives on Differential Sticking Probability, Case Study: Lignosulfonate & Salt saturated Muds [Volume 2, Issue 1, 2018, Pages 64-84]
Azad, Mohammad_Reza Upscaling of the geomechanics parameters of reservoir using the kernel function method with adaptive bandwidth and comparing with the results of wavelet transformation [Volume 2, Issue 2, 2019, Pages 40-54]
Azadi tabar, Mohammad New Method of Generating and Clustering Pore Network Model [Volume 3, Issue 2, 2019, Pages 12-26]
Azizzadeh, Mehran Determination of safe mud weight window and optimal drilling path in the Gadwan formation using rock failure criteria in one of the hydrocarbon fields in southwest Iran [Volume 6, Issue 4, 2023, Pages 61-80]

B

Babaei, Saeed Evaluation of absolute adsorption isotherm in shale gas reservoirs [Volume 5, Issue 1, 2022, Pages 1-16]
Bahrehdar, Mohammad Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
Bajoolvand, Mahdi Impact of Salt Formation’s Geomechanical properties on the casing collapse event in oil wells using Numerical modeling [Volume 2, Issue 2, 2019, Pages 55-68]
Barzegar, Farzad New Method of Generating and Clustering Pore Network Model [Volume 3, Issue 2, 2019, Pages 12-26]
Barzegar, Farzad New Method of Pore Network Extraction from 3D CT scan Images of Rock [Volume 3, Issue 3, 2019, Pages 1-13]
Bavand Savadkoohi, Mojtaba Geostatistical multiple-point modeling of heterogeneous facies of petroleum reservoirs in order to control of the sand production [Volume 3, Issue 2, 2019, Pages 28-43]
Bazyar, Mohammad Javad Introducing an optimized procedure for estimation of porosity, using a combination well log data [Volume 5, Issue 1, 2022, Pages 82-91]
Behifar, Maryam Identifying the technological capabilities of geomechanics in the oil and gas industry [Volume 6, Issue 2, 2023, Pages 48-63]
Biglari, Farid Reza An Analytical Poroelastic Model to Study the LCM Performance during the Wellbore Strengthening [Volume 3, Issue 4, 2020, Pages 57-74]
Biglari, Farid Reza An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
Buick, James Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]

C

Changizi, Foad Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]

D

Daghighiasli, Alireza Presenting a model for predicting global crude oil prices based on artificial intelligence algorithm [(Articles in Press)]
Damankeshideh, Marjan Presenting a model for predicting global crude oil prices based on artificial intelligence algorithm [(Articles in Press)]
Daneshy, Ali Recent Advances in Hydraulic Fracturing for Enhanced Well Productivity: State of the Art Report [Volume 3, Issue 1, 2019, Pages 14-33]
Darbor, Mohammad A laboratory study of the effects of stress regimes on hydraulic fracturing [Volume 3, Issue 3, 2019, Pages 45-59]
Dashti, Nader Improving drilling speed and cost reduction through risk management and well-trajectory design [Volume 1, Issue 1, 2017, Pages 29-39]
Davari, Mohammad Ali Permeability Prediction from Log Data using Machine Learning Methods [(Articles in Press)]
Davari, Mohammad Ali Optimizing Deep Learning Models for Shear Wave Velocity Estimation Utilizing Petrophysical Logs: A Case Study on an Oil Reservoir in Southern Iran [(Articles in Press)]
Dehodar, Mohsen The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
Dehodar, Mohsen Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
Deris Abdolah pour, Mohammad Reza Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
Dusseault, Maurice B Redeveloping Mature Fractured Carbonate Reservoirs [Volume 3, Issue 1, 2019, Pages 1-13]

E

Ebadi, Hamid The feasibility of using InSAR technique to measure land subsidence caused by petroleum extraction [Volume 6, Issue 1, 2023, Pages 66-77]
Ebadi, Mohajer Numerical simulation the effect of back rake angle PDC cutter on the rock fracture mechanism using discrete element method [Volume 2, Issue 2, 2019, Pages 1-14]
Ebrahimabadi, Arash Geomechanical design of Shadegan oilfield in order to modeling and designing ERD wells in Bangestan formations [Volume 5, Issue 1, 2022, Pages 29-45]
Ebrahimabadi, Arash A Model to Predict the Drilling Rate of Penetration in Shadegan Oil Field Using Artificial Neural Network [Volume 5, Issue 2, 2022, Pages 1-16]
Eil Saadatmand, Fatemeh Optimizing Deep Learning Models for Shear Wave Velocity Estimation Utilizing Petrophysical Logs: A Case Study on an Oil Reservoir in Southern Iran [(Articles in Press)]
Emami Niri, Mohammad Rock Physics Modeling in Sandstone Reservoirs – Review of Theoretical Models and a Field Example [Volume 1, Issue 2, 2017, Pages 74-85]
Emami Niri, Mohammad Implementing the teaching-learning based optimization algorithm to predict shear wave velocity from well logs in sandstone and carbonate case studies [Volume 1, Issue 2, 2017, Pages 86-99]
Emami Niri, Mohammad Rock physics modeling in carbonate reservoirs- Review of theoretical models and a case study [Volume 3, Issue 4, 2020, Pages 90-108]
Emamzadeh, Abolghasem Estimation of Permeability of Carbonate Gas Reservoirs Using Nuclear Magnetic Resonance (NMR) Log and FZI-Stonley Method [Volume 3, Issue 4, 2020, Pages 26-43]
Enayati Najafabadi, Mohammad Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
Esfandiari, Morteza Numerical study of the effect of reservoir permeability and fluid leak-off factor on the Hydraulic fracture characteristics in oil reservoirs and comparison with KGD and PKN analytical models [Volume 5, Issue 1, 2022, Pages 60-81]
Eshraghi, Hassan Elastic properties of Carbonate Reservoir Rocks: Laboratory Measurement and Numerical Simulation using X-ray Computed Tomography Images on Kangan Carbonates [Volume 6, Issue 1, 2023, Pages 32-39]
Eskandri Rad, Hossein Laboratory study of the effect of proppant operating variables on fracture conductivity under minimum horizontal stress conditions in one of the Iranian reservoirs [Volume 6, Issue 4, 2023, Pages 1-15]
Ezati, Mohsen Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]

F

Faez, Mohammad Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2022, Pages 10-19]
Fahimifar, Ahmad Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
Falahat, Reza A practical 4D seismic attribute to estimate saturation and pressure changes arising from reservoir production and injection [Volume 1, Issue 2, 2017, Pages 60-73]
Farnood Ahmadi, Farshid The feasibility of using InSAR technique to measure land subsidence caused by petroleum extraction [Volume 6, Issue 1, 2023, Pages 66-77]
Fatehi Marji, Mohammad Field design of hydraulic fracturing in a sandstone formation (Case study: A vertical well in Hugoton gas field in the USA) [Volume 1, Issue 2, 2017, Pages 1-21]
Fatehi Marji, Mohammad Stability analysis of a vertical wellbore in one of Iran's South-West oilfields using the plastic zone concept [Volume 2, Issue 1, 2018, Pages 18-40]
Fatehi Marji, Mohammad Numerical simulation the effect of back rake angle PDC cutter on the rock fracture mechanism using discrete element method [Volume 2, Issue 2, 2019, Pages 1-14]
Fatehi Marji, Mohammad Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
Fatehi Marji, Mohammad Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2022, Pages 1-18]
Fatehi Marji, Mohammad Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
Fatehi Marji, Mohammad 3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
Fatehi Marji, Mohammad The explosive fracturing technique analysis for highly low permeable reservoirs using analytical, displacement discontinuity and finite difference coupled method [Volume 6, Issue 3, 2023, Pages 43-57]
Fazaeli zadeh, Mohammad Experimental study of the penetration rate impact and drilling cutting properties on the hole cleaning index (HCI) in directional drilling wells [Volume 1, Issue 1, 2017, Pages 15-28]
Fereidooni, Masoud Determining the probability of the faults and fractures in one of the oil reservoirs based on the seismic indicators of the steering cube [Volume 6, Issue 2, 2023, Pages 21-30]
Fianu, John Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]

G

Gaeini, Ahmad Reservoir Characterization Clustering Analysis to Identify Rock Type Using KMEANS Method in South West Iranian Oil Field [Volume 4, Issue 2, 2022, Pages 35-47]
Gaeini, Ahmad Designing an Ensemble model for hydrocarbon reservoir Permeability prediction by petrophysical lithology Labeling [Volume 4, Issue 2, 2022, Pages 48-59]
Ghadiri, Majid Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
Ghafoori, Mohammad Investigating the effect of pore pressure increase due to gas injection on the stability of normal faults in one of the SW Iranian oil fields [Volume 2, Issue 2, 2019, Pages 30-39]
Ghafoori, Mohammad Investigating the creep behavior some gypsum and anhydrite rock samples of Gachsaran formation under room and sealrock temperature conditions [Volume 6, Issue 1, 2023, Pages 52-65]
Ghalibaf Mohammad abadi, Hamid Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
Ghalibaf Mohammad abadi, Hamid Application of Advanced Machine Learning Models for Lithological Facies Prediction in a Southern Iranian Oilfield [Volume 6, Issue 4, 2023, Pages 81-98]
Ghalibaf Mohammad Abadi, Hamid Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
Ghandehari, Hamid Determining the probability of the faults and fractures in one of the oil reservoirs based on the seismic indicators of the steering cube [Volume 6, Issue 2, 2023, Pages 21-30]
Gharavi, Amir Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
Ghasemzadeh, Hasan A coupled Geomechanics-Hydrodynamic model for numerical prediction of sand production [Volume 1, Issue 1, 2017, Pages 68-81]
Ghasemzadeh, Hasan A fully coupled thermo-hydro-mechanical model for simulating hydro-carbon reservoirs [Volume 3, Issue 2, 2019, Pages 60-80]
Ghasemzadeh, Hasan Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
Ghasemzadeh, Hasan Evaluation of absolute adsorption isotherm in shale gas reservoirs [Volume 5, Issue 1, 2022, Pages 1-16]
Ghasemzadeh, Hasan Numerical Investigation of oil recovery due to nanofluid injection into the oil reservoirs [Volume 5, Issue 3, 2022, Pages 61-73]
Ghasemzadeh, Hasan Propagation of inhomogeneous waves in unsaturated visco-poroelastic layered media [Volume 5, Issue 3, 2022, Pages 1-25]
Ghasemzadeh, Hasan Numerical investigation of the effects of Fluid Inertia on Sand Production in Cased-Perforated Oil Wells [Volume 6, Issue 3, 2023, Pages 9-20]
Ghasemzadeh, Hasan Non-Coaxial Multi-laminate model for anisotropic granular material and its numerical implementation [Volume 6, Issue 3, 2023, Pages 21-42]
Ghasemzadeh, Hasan Oil-contamination impact on bearing capacity of strip footing placed on geocell-reinforced sand under eccentric load [Volume 6, Issue 3, 2023, Pages 58-73]
Ghavami, Reza Discrete multiscale modelling of fractures in natural fractured reservoir, a case study from a field in the Persian Gulf [Volume 3, Issue 4, 2020, Pages 75-89]
Ghavami-Riabi, Reza Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2022, Pages 10-19]
Gholami, Ali Time domain modeling of seismic waves in visco-acoustic media with variable density and topography [Volume 6, Issue 2, 2023, Pages 11-20]
Gholami, Raoof On the Compaction and Viscous Behavior of Deep-Water Reservoirs [Volume 3, Issue 1, 2019, Pages 65-78]
Gholami, Raoof Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
Gholami, Raoof Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
Gholamniya, Reza Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
Ghoochaninejad, Hesam Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
Ghorbani, Hamzeh Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2022, Pages 35-49]
Ghorbani, Hamzeh Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2022, Pages 96-113]
Ghoreishian, Ali Treatment of relative permeability term in two-phase flow problems in porous media [Volume 5, Issue 3, 2022, Pages 84-91]
Gloaguen, Erwan Geostatistical multiple-point modeling of heterogeneous facies of petroleum reservoirs in order to control of the sand production [Volume 3, Issue 2, 2019, Pages 28-43]
Gorchian, Nadergoli Mechanisms to achieve competitive advantage of petroleum Geomechanics in first-level universities in Tehran [Volume 6, Issue 1, 2023, Pages 1-12]
Goshtasbi, Kaamran Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
Goshtasbi, Kaamran Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2022, Pages 48-67]
Goshtasbi, Kamran Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2022, Pages 19-34]

H

Hadiloo, Saeed Quantitative seismic facies analysis by the cross-correlation coding and matching with depositional facies; (A case study of the Poseidon region of Australia ( [Volume 5, Issue 4, 2022, Pages 54-67]
Hafezi Moghaddas, HAMID Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
Hafezi Moghaddas, Naser Investigating the effect of pore pressure increase due to gas injection on the stability of normal faults in one of the SW Iranian oil fields [Volume 2, Issue 2, 2019, Pages 30-39]
Hafezi Moghaddas, Naser Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
Hafezi Moghaddas, Naser Investigating the creep behavior some gypsum and anhydrite rock samples of Gachsaran formation under room and sealrock temperature conditions [Volume 6, Issue 1, 2023, Pages 52-65]
Hafezi Moghaddas, Naser Application of Advanced Machine Learning Models for Lithological Facies Prediction in a Southern Iranian Oilfield [Volume 6, Issue 4, 2023, Pages 81-98]
Haghshenas Lari, Sajjad An investigation of the effects of casing erosion and cement elastic modulus on the casing collapse phenomenon: a case study on an oil field in southwest Iran [Volume 2, Issue 2, 2019, Pages 15-29]
Haji Mohammad Hassan Arab, Mohammad Hosein Laboratory study of the effect of proppant operating variables on fracture conductivity under minimum horizontal stress conditions in one of the Iranian reservoirs [Volume 6, Issue 4, 2023, Pages 1-15]
Hamidzadeh Moghadam, Rasoul The effect of the number, dimensions and location of anomalies on the crosswell Traveltime tomography results [Volume 6, Issue 3, 2023, Pages 1-8]
Hashemian, Khadijeh Study of the relationship between fracture intensity distribution and geomechanical parameters in Sarvak reservoir, in an oilfield located in Dezful Embayment [Volume 6, Issue 2, 2023, Pages 1-10]
Hashemizadeh, Abbas 3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
Hassan, Mohamed Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
Hassani, Hossein Gaussian process regression in seismic fault detection [Volume 3, Issue 2, 2019, Pages 27-41]
Heydari, Mohsen Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
Heydari, Mohsen Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
Heydari, Mojtaba Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2022, Pages 35-47]
Hosseini, Mehdi Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
Hydarizad, Mojtaba Application of Advanced Machine Learning Models for Lithological Facies Prediction in a Southern Iranian Oilfield [Volume 6, Issue 4, 2023, Pages 81-98]

I

Iranmanesh, Mohammad Ali Investigating the effects of conductive-convective heat transfer on hydraulic fracturing via a fully coupled THM analysis using an enriched EFG method [Volume 5, Issue 3, 2022, Pages 74-83]
Iranmanesh, Mohammad Ali Numerical simulation of cohesive crack growth and the normal contact in porous media using enriched element-free Galerkin method [Volume 6, Issue 2, 2023, Pages 31-39]

J

Jaafari, Parivash Mechanisms to achieve competitive advantage of petroleum Geomechanics in first-level universities in Tehran [Volume 6, Issue 1, 2023, Pages 1-12]
Jaafari, Parivash Identifying the technological capabilities of geomechanics in the oil and gas industry [Volume 6, Issue 2, 2023, Pages 48-63]
Jafari, Arezou Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
Jahanian, Mohammad Samed Oil-contamination impact on bearing capacity of strip footing placed on geocell-reinforced sand under eccentric load [Volume 6, Issue 3, 2023, Pages 58-73]
Jalakani, Reza Selection of drilling fluid weight based on rock mechanics criteria: a case study in one of the south-west Iranian field [Volume 7, Issue 1, 2024, Pages 1-11]
Jalali, Seyed-Mohammad Esmaeil Analytical Evaluation of Sand Production Process for Oil and Gas Wells in the Asmari Reservoir of the Ahwaz Field [Volume 6, Issue 4, 2023, Pages 25-50]
Jalalifar, Hossein Experimental Investigation of Iranian Quartz Sands for Proppant Production Used in Hydraulic Fracturing Operations [Volume 2, Issue 2, 2019, Pages 69-83]
Jalalifar, Hossein Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
Jamshidi, Saeid Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2022, Pages 20-34]
Javadi, Morteza Tree-dimensional Crude Oil Flow Simulation through Rough-walled Fractures for Evaluating the Classic Geometrical Equations [Volume 2, Issue 1, 2018, Pages 1-17]
Javadi, Morteza Non-linear Behavior of Crude Oil Flow through Rough-walled Fractures by Three-Dimensional Nevier-Stokes Numerical Simulation [Volume 3, Issue 2, 2019, Pages 44-59]
Javadi, Morteza Evaluation of Critical Reynolds Number for Non-linear Crude Oil Flow through Rough-walled Fractures [Volume 5, Issue 4, 2022, Pages 29-40]
Javaherian, Abdolrahim Gaussian process regression in seismic fault detection [Volume 3, Issue 2, 2019, Pages 27-41]
Jenabi, Hooman Numerical modeling of roughness effect on fluid flow behavior in natural rock fracture with Fluent Software [Volume 3, Issue 2, 2019, Pages 1-11]
Joneidi, Samieh Determining the probability of the faults and fractures in one of the oil reservoirs based on the seismic indicators of the steering cube [Volume 6, Issue 2, 2023, Pages 21-30]

K

Kamkar_Rouhani, Abolghase Upscaling of the geomechanics parameters of reservoir using the kernel function method with adaptive bandwidth and comparing with the results of wavelet transformation [Volume 2, Issue 2, 2019, Pages 40-54]
Kamyab, Fatemeh Numerical simulation of cohesive crack growth and the normal contact in porous media using enriched element-free Galerkin method [Volume 6, Issue 2, 2023, Pages 31-39]
Karami, Mohsen An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
Karimi, Mojtaba Implementation of a new proxy algorithm in earth science - A case study: Automatic history matching in one of oil reservoirs [Volume 1, Issue 1, 2017, Pages 1-14]
Karimpouli, Sadegh Improved relations for permeability-porosity trends using digital rock physics [Volume 1, Issue 1, 2017, Pages 40-52]
Kazemi, Ali Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2022, Pages 35-47]
Kenomore, Michael Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
Kharrat, Riyaz Improving drilling speed and cost reduction through risk management and well-trajectory design [Volume 1, Issue 1, 2017, Pages 29-39]
Khezerloo-ye Aghdam, Saeed Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2022, Pages 35-49]
Khezerloo-ye Aghdam, Saeed Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2022, Pages 96-113]
Khodaei Ardabili, Ahmadali A coupled Geomechanics-Hydrodynamic model for numerical prediction of sand production [Volume 1, Issue 1, 2017, Pages 68-81]
Khodaei Ardabili, Ahmad Ali Numerical investigation of the effects of Fluid Inertia on Sand Production in Cased-Perforated Oil Wells [Volume 6, Issue 3, 2023, Pages 9-20]
Khodayari, Ahmadreza Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2022, Pages 48-67]
Khodayari, Ahmadreza Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2022, Pages 19-34]
Khoshbakht, Farhad Detection of permeable fractures by Stoneley waves in a hydrocarbon well in south of Iran [Volume 2, Issue 1, 2018, Pages 55-63]
Kiyani, Ali Reza The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]

L

Lak, Meysam The explosive fracturing technique analysis for highly low permeable reservoirs using analytical, displacement discontinuity and finite difference coupled method [Volume 6, Issue 3, 2023, Pages 43-57]
Lakirouhani, Ali Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
Lashkaripour, Gholamreza Investigating the creep behavior some gypsum and anhydrite rock samples of Gachsaran formation under room and sealrock temperature conditions [Volume 6, Issue 1, 2023, Pages 52-65]
Lashkaripour, Gholam Reza Investigating the effect of pore pressure increase due to gas injection on the stability of normal faults in one of the SW Iranian oil fields [Volume 2, Issue 2, 2019, Pages 30-39]
Lashkaripour, Gholam Reza Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
Lashkaripour, Gholam Reza Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
Leisi, Ahsan The effect of the number, dimensions and location of anomalies on the crosswell Traveltime tomography results [Volume 6, Issue 3, 2023, Pages 1-8]

M

MacBeth, Colin A practical 4D seismic attribute to estimate saturation and pressure changes arising from reservoir production and injection [Volume 1, Issue 2, 2017, Pages 60-73]
Mahani, Hassan Theoretical and Conceptual Investigation of the Effect of Pore Water Chemistry on Formation Breakdown Pressure Estimation using Conventional Models in Hydraulic Fracturing Operation [Volume 6, Issue 1, 2023, Pages 40-51]
Mahdipour, Elham Application of Advanced Machine Learning Models for Lithological Facies Prediction in a Southern Iranian Oilfield [Volume 6, Issue 4, 2023, Pages 81-98]
Mansouri, Ali Reza The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
Masihi, Mohsen New Method of Generating and Clustering Pore Network Model [Volume 3, Issue 2, 2019, Pages 12-26]
Masihi, Mohsen New Method of Pore Network Extraction from 3D CT scan Images of Rock [Volume 3, Issue 3, 2019, Pages 1-13]
Masihi, Mohsen Estimation of Permeability of Carbonate Gas Reservoirs Using Nuclear Magnetic Resonance (NMR) Log and FZI-Stonley Method [Volume 3, Issue 4, 2020, Pages 26-43]
Masihi, Mohsen Theoretical and Conceptual Investigation of the Effect of Pore Water Chemistry on Formation Breakdown Pressure Estimation using Conventional Models in Hydraulic Fracturing Operation [Volume 6, Issue 1, 2023, Pages 40-51]
Mazrouie, Amirhossien Numerical simulation the effect of back rake angle PDC cutter on the rock fracture mechanism using discrete element method [Volume 2, Issue 2, 2019, Pages 1-14]
Mehdipour, Vali Study of the relationship between fracture intensity distribution and geomechanical parameters in Sarvak reservoir, in an oilfield located in Dezful Embayment [Volume 6, Issue 2, 2023, Pages 1-10]
Mehmandoost, Fariba Rock physics modeling in carbonate reservoirs- Review of theoretical models and a case study [Volume 3, Issue 4, 2020, Pages 90-108]
Mehrad, Mohammad Optimizing Deep Learning Models for Shear Wave Velocity Estimation Utilizing Petrophysical Logs: A Case Study on an Oil Reservoir in Southern Iran [(Articles in Press)]
Mehranpour, Mahdi The Prediction of the Rate of Penetration Using Artificial Neural Networks and applying the Fuzzy AHP Method for Weighting Input Parameters in One of the Western Oilfields of Iran [Volume 3, Issue 3, 2019, Pages 28-44]
Mehrgini, Behzad Elastic properties of Carbonate Reservoir Rocks: Laboratory Measurement and Numerical Simulation using X-ray Computed Tomography Images on Kangan Carbonates [Volume 6, Issue 1, 2023, Pages 32-39]
Mirabbasi, Seyed Morteza An Analytical Poroelastic Model to Study the LCM Performance during the Wellbore Strengthening [Volume 3, Issue 4, 2020, Pages 57-74]
Mirabbasi, Seyed Morteza Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
Mirabbasi, Seyed Morteza An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
Mirderikvand, Hossein Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
Mirzaeian, Yousef Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
Mirzanejad, Majid Propagation of inhomogeneous waves in unsaturated visco-poroelastic layered media [Volume 5, Issue 3, 2022, Pages 1-25]
Misaghi, Ali Introducing an optimized procedure for estimation of porosity, using a combination well log data [Volume 5, Issue 1, 2022, Pages 82-91]
Misaghi, Ali Contribution of porosity and clay content on shear wave velocity in shaly formations [Volume 6, Issue 2, 2023, Pages 40-47]
Moallemi, Seyed Ali Gaussian process regression in seismic fault detection [Volume 3, Issue 2, 2019, Pages 27-41]
MOAREFVAND, PARVIZ Experimental study of the penetration rate impact and drilling cutting properties on the hole cleaning index (HCI) in directional drilling wells [Volume 1, Issue 1, 2017, Pages 15-28]
MOAREFVAND, PARVIZ Experimental Study of Fluid Loss Additives on Differential Sticking Probability, Case Study: Lignosulfonate & Salt saturated Muds [Volume 2, Issue 1, 2018, Pages 64-84]
MOAREFVAND, PARVIZ The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
MOAREFVAND, PARVIZ Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
Moghadasi, Jamshid Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
Mohammadian, Aram Determination of Reservoir Drillability Index based on Drilling Penetration Rate in one oil well in south west of Iran [Volume 1, Issue 2, 2017, Pages 22-39]
Mohammadizadeh, Saeed Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
Mohebi, Mohsen Numerical simulation the effect of back rake angle PDC cutter on the rock fracture mechanism using discrete element method [Volume 2, Issue 2, 2019, Pages 1-14]
Molaghab, Abdollah Determination of Reservoir Drillability Index based on Drilling Penetration Rate in one oil well in south west of Iran [Volume 1, Issue 2, 2017, Pages 22-39]
Molaghab, Abdollah Investigating the effect of pore pressure increase due to gas injection on the stability of normal faults in one of the SW Iranian oil fields [Volume 2, Issue 2, 2019, Pages 30-39]
Mollaesmaeil, Saeed Discrete multiscale modelling of fractures in natural fractured reservoir, a case study from a field in the Persian Gulf [Volume 3, Issue 4, 2020, Pages 75-89]
Moomivand, Hassan Making artificial sandstone with a wide range of porosities [Volume 2, Issue 1, 2018, Pages 85-99]
Moosavi, Mahdi Evaluating three conventional tests for determining mode I static fracture toughness of rocks [Volume 1, Issue 1, 2017, Pages 53-67]
Moosavi, Mirhassan Optimizing Deep Learning Models for Shear Wave Velocity Estimation Utilizing Petrophysical Logs: A Case Study on an Oil Reservoir in Southern Iran [(Articles in Press)]
Moradi Ghiasabadi, Behnaz Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
Mortazavi, Ali Implementation of a new proxy algorithm in earth science - A case study: Automatic history matching in one of oil reservoirs [Volume 1, Issue 1, 2017, Pages 1-14]
Mortazavi, Ali numerical and analytical study of reservoir geomechanics model for underbalanced drilling in sandstone formations [Volume 5, Issue 2, 2022, Pages 34-47]
Mortazavi, Seyed Alireza Field design of hydraulic fracturing in a sandstone formation (Case study: A vertical well in Hugoton gas field in the USA) [Volume 1, Issue 2, 2017, Pages 1-21]
Mosaddeg, Hossein Determination of safe mud weight window and optimal drilling path in the Gadwan formation using rock failure criteria in one of the hydrocarbon fields in southwest Iran [Volume 6, Issue 4, 2023, Pages 61-80]
Movahhed, Ata Estimation of Permeability of Carbonate Gas Reservoirs Using Nuclear Magnetic Resonance (NMR) Log and FZI-Stonley Method [Volume 3, Issue 4, 2020, Pages 26-43]

N

Nabi Bidhendi, Majid Detection of permeable fractures by Stoneley waves in a hydrocarbon well in south of Iran [Volume 2, Issue 1, 2018, Pages 55-63]
Nabi-Bidhendi, Majid Evaluation of hydrocarbon generation potential of source rocks in North Dezful region by determining the richness of organic matter using well surveying logs [Volume 5, Issue 2, 2022, Pages 56-69]
Naderi, Hossein Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
Najafi, Mehdi Numerical simulation the effect of back rake angle PDC cutter on the rock fracture mechanism using discrete element method [Volume 2, Issue 2, 2019, Pages 1-14]
Nakhaee, Ali Correction Investigating the Design of Casing Pipes Using Drilling Data Analysis in Bangestan Wells, One of the Oil Fields in the Southwest of Iran [Volume 2, Issue 1, 2018, Pages 41-54]
Nakhaee, Ali Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
Namdar, Hamed Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2022, Pages 1-18]
Naseri Karimvand, Mohsen Correction Investigating the Design of Casing Pipes Using Drilling Data Analysis in Bangestan Wells, One of the Oil Fields in the Southwest of Iran [Volume 2, Issue 1, 2018, Pages 41-54]
Nasiri, Ali Reza An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2022, Pages 60-75]
Nasri, Mohammad Javad Numerical modeling of roughness effect on fluid flow behavior in natural rock fracture with Fluent Software [Volume 3, Issue 2, 2019, Pages 1-11]
Nazarisaram, Mahdi Geomechanical design of Shadegan oilfield in order to modeling and designing ERD wells in Bangestan formations [Volume 5, Issue 1, 2022, Pages 29-45]
Nikkhah, Majid Wave propagation study of across rock masses with single and parallel joints using numerical modelling [Volume 3, Issue 3, 2019, Pages 60-74]
Nikkhah, Majid Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2022, Pages 35-47]
Nikkhah, Mohammad Sadegh Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2022, Pages 68-84]
Nikoosokhan, Saeid numerical and analytical study of reservoir geomechanics model for underbalanced drilling in sandstone formations [Volume 5, Issue 2, 2022, Pages 34-47]
Nikoosokhan, Saeid Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
Nikouii, Saman Numerical Investigation of oil recovery due to nanofluid injection into the oil reservoirs [Volume 5, Issue 3, 2022, Pages 61-73]
Noori, maryam Gaussian process regression in seismic fault detection [Volume 3, Issue 2, 2019, Pages 27-41]
Noroozi, mehdi Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2022, Pages 85-103]
Norouzi, Peyman The effect of loading condition and the nmber of shaped charges on the perforation performane. [Volume 5, Issue 4, 2022, Pages 68-81]
Norouzi Apourvari, Saeid Experimental Investigation of Iranian Quartz Sands for Proppant Production Used in Hydraulic Fracturing Operations [Volume 2, Issue 2, 2019, Pages 69-83]

O

Omrani, Sajjad Examining Key Factors Influencing the Accuracy of Water Saturation Calculations in Carbonate Reservoirs: A Case Study of Kangan and Dalan Formations in the Western Persian Gulf [Volume 7, Issue 1, 2024, Pages 12-24]

P

Pahlavani, Parham The Prediction of the Rate of Penetration Using Artificial Neural Networks and applying the Fuzzy AHP Method for Weighting Input Parameters in One of the Western Oilfields of Iran [Volume 3, Issue 3, 2019, Pages 28-44]
Pak, Ali Numerical study of the effect of reservoir permeability and fluid leak-off factor on the Hydraulic fracture characteristics in oil reservoirs and comparison with KGD and PKN analytical models [Volume 5, Issue 1, 2022, Pages 60-81]
Pak, Ali Investigating the effects of conductive-convective heat transfer on hydraulic fracturing via a fully coupled THM analysis using an enriched EFG method [Volume 5, Issue 3, 2022, Pages 74-83]
Pak, Ali Numerical Investigation of Total Stresses Change in Oil Reservoirs due to Extraction, Considering Non-linear Behavior for the Reservoir Rock [Volume 6, Issue 1, 2023, Pages 13-31]
Pakdaman, Ali Mohamad Evaluating three conventional tests for determining mode I static fracture toughness of rocks [Volume 1, Issue 1, 2017, Pages 53-67]
Pakdaman, Ali Mohamad The Prediction of the Rate of Penetration Using Artificial Neural Networks and applying the Fuzzy AHP Method for Weighting Input Parameters in One of the Western Oilfields of Iran [Volume 3, Issue 3, 2019, Pages 28-44]
Pourmazaheri, Yaser Stability analysis of a vertical wellbore in one of Iran's South-West oilfields using the plastic zone concept [Volume 2, Issue 1, 2018, Pages 18-40]

R

Rafiei, Yousef Laboratory study of the effect of proppant operating variables on fracture conductivity under minimum horizontal stress conditions in one of the Iranian reservoirs [Volume 6, Issue 4, 2023, Pages 1-15]
Rahbar, Mahdi Study on effect of fracture density on borehole stability and drilling fluid loss using Three-dimensional DEM-DFN method: A case study for SIE-01 borehole in Persian Gulf oilfield [Volume 3, Issue 3, 2019, Pages 75-91]
Rahbar, Mahdi Investigation of mud loss mechanism for vertical wellbore in fractures formation considering dual porosity conditions: A case study for SIE-05 wellbore in Persian Gulf oilfield [Volume 3, Issue 4, 2020, Pages 1-25]
Rahbar, Mahdi Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
Rahmati, Saeed Time domain modeling of seismic waves in visco-acoustic media with variable density and topography [Volume 6, Issue 2, 2023, Pages 11-20]
Rajabi, Maysam A Numerical Study of the Effect of Fluid Pressure on Smeared Cracking Behavior in the Caprock of Underground Gas Storage Reservoirs [Volume 2, Issue 2, 2019, Pages 84-105]
Rajabi, Meysam Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2022, Pages 35-49]
Rajabi, Meysam Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2022, Pages 96-113]
Ramezanzadeh, Ahmad Determination of Reservoir Drillability Index based on Drilling Penetration Rate in one oil well in south west of Iran [Volume 1, Issue 2, 2017, Pages 22-39]
Ramezanzadeh, Ahmad Impact of Salt Formation’s Geomechanical properties on the casing collapse event in oil wells using Numerical modeling [Volume 2, Issue 2, 2019, Pages 55-68]
Ramezanzadeh, Ahmad Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2022, Pages 10-19]
Ramezanzadeh, Ahmad Analytical Evaluation of Sand Production Process for Oil and Gas Wells in the Asmari Reservoir of the Ahwaz Field [Volume 6, Issue 4, 2023, Pages 25-50]
Ramezazadeh, Ahmad Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2022, Pages 85-103]
Rammezanzadeh, Ahmad Numerical modeling of roughness effect on fluid flow behavior in natural rock fracture with Fluent Software [Volume 3, Issue 2, 2019, Pages 1-11]
Rasol Zadeh, Hossein Quantitative seismic facies analysis by the cross-correlation coding and matching with depositional facies; (A case study of the Poseidon region of Australia ( [Volume 5, Issue 4, 2022, Pages 54-67]
Razavi, Mohammadreza Identifying the technological capabilities of geomechanics in the oil and gas industry [Volume 6, Issue 2, 2023, Pages 48-63]
Razavian, Fatemeh Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
Razmkhah, Arash Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2022, Pages 71-95]
Razmkhah, Arash Oil-contamination impact on bearing capacity of strip footing placed on geocell-reinforced sand under eccentric load [Volume 6, Issue 3, 2023, Pages 58-73]
Rezaee, Mohammad Theoretical and Conceptual Investigation of the Effect of Pore Water Chemistry on Formation Breakdown Pressure Estimation using Conventional Models in Hydraulic Fracturing Operation [Volume 6, Issue 1, 2023, Pages 40-51]
Rezakhani, Parisa Optimizing Deep Learning Models for Shear Wave Velocity Estimation Utilizing Petrophysical Logs: A Case Study on an Oil Reservoir in Southern Iran [(Articles in Press)]
Riahi, Mohammad Ali Evaluation of Reservoir Properties and Fracture Estimation Using Petrophysical Logs in a Southwestern Iranian Hydrocarbon Field [Volume 3, Issue 4, 2020, Pages 44-56]
Riahi, Mohammad Ali Separation of hydrocarbon reservoir zone using three-dimensional seismic data, wells and geomechanical parameters in one of the oil fields in southern Iran [Volume 5, Issue 4, 2022, Pages 41-53]
Romiani, Farshid Evaluation of Reservoir Properties and Fracture Estimation Using Petrophysical Logs in a Southwestern Iranian Hydrocarbon Field [Volume 3, Issue 4, 2020, Pages 44-56]

S

Saadat, Iman Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
Saadatnia, Narges Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
Saadouni, Jalil Evaluation of hydrocarbon generation potential of source rocks in North Dezful region by determining the richness of organic matter using well surveying logs [Volume 5, Issue 2, 2022, Pages 56-69]
Sabah, Mohammad Assesment of self-killing as a blowout control method in deep water wells [Volume 5, Issue 2, 2022, Pages 17-33]
Saberi, Mohammad Hossein Evaluation of Reservoir Properties and Fracture Estimation Using Petrophysical Logs in a Southwestern Iranian Hydrocarbon Field [Volume 3, Issue 4, 2020, Pages 44-56]
Sadrnejad, Seyed Amirodin A coupled Geomechanics-Hydrodynamic model for numerical prediction of sand production [Volume 1, Issue 1, 2017, Pages 68-81]
Saeidi, Omid Study on effect of fracture density on borehole stability and drilling fluid loss using Three-dimensional DEM-DFN method: A case study for SIE-01 borehole in Persian Gulf oilfield [Volume 3, Issue 3, 2019, Pages 75-91]
Saeidi, Omid Investigation of mud loss mechanism for vertical wellbore in fractures formation considering dual porosity conditions: A case study for SIE-05 wellbore in Persian Gulf oilfield [Volume 3, Issue 4, 2020, Pages 1-25]
Saeidi, Omid Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
Safavi, Seyed Javad Permeability Prediction from Log Data using Machine Learning Methods [(Articles in Press)]
Salehnezhad, Amir Wave propagation study of across rock masses with single and parallel joints using numerical modelling [Volume 3, Issue 3, 2019, Pages 60-74]
Samadi, Iman Introducing a strategy in recognition and simultaneous modelling of fractures with FMI logs and seismic data through reservoir zonation in a field from south of Iran [Volume 3, Issue 3, 2019, Pages 14-27]
Samani, Shirin Elastic properties of Carbonate Reservoir Rocks: Laboratory Measurement and Numerical Simulation using X-ray Computed Tomography Images on Kangan Carbonates [Volume 6, Issue 1, 2023, Pages 32-39]
Sanei, Manouchehr Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
Sanei, Manouchehr 3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
Sanei, Manouchehr Development of Mohr-Coulomb criterion elastoplastic integration algorithm scheme for rock [Volume 6, Issue 4, 2023, Pages 51-60]
Sanei, Manouchehr The explosive fracturing technique analysis for highly low permeable reservoirs using analytical, displacement discontinuity and finite difference coupled method [Volume 6, Issue 3, 2023, Pages 43-57]
Sarkheil, Hamid Combining Voronoi Triangulation Discrete Fracture Network (DFN) Models with Fractal Dimension Analysis of Complex Sequences for Predicting Porosity and Permeability [Volume 6, Issue 3, 2023, Pages 74-81]
Sarmadivaleh, Mohammad Contribution of porosity and clay content on shear wave velocity in shaly formations [Volume 6, Issue 2, 2023, Pages 40-47]
Senemari, Saeedeh Permeability Prediction from Log Data using Machine Learning Methods [(Articles in Press)]
Shaban-nia, Hamed Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
Shad, Saeed An investigation of the effects of casing erosion and cement elastic modulus on the casing collapse phenomenon: a case study on an oil field in southwest Iran [Volume 2, Issue 2, 2019, Pages 15-29]
Shah, Amjad Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2022, Pages 50-70]
Shakeri, Hadi A laboratory study of the effects of stress regimes on hydraulic fracturing [Volume 3, Issue 3, 2019, Pages 45-59]
Shakeri Garakani, Shahrooz Non-Coaxial Multi-laminate model for anisotropic granular material and its numerical implementation [Volume 6, Issue 3, 2023, Pages 21-42]
Shams, Asghar A practical 4D seismic attribute to estimate saturation and pressure changes arising from reservoir production and injection [Volume 1, Issue 2, 2017, Pages 60-73]
Shamsipoor, Ali Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
Sharghi, Yousef Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
Shariat zadeh, Arash Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
Sharifi, Barzin Numerical Investigation of Total Stresses Change in Oil Reservoirs due to Extraction, Considering Non-linear Behavior for the Reservoir Rock [Volume 6, Issue 1, 2023, Pages 13-31]
Sheikholeslam, Ali Analytical Evaluation of Sand Production Process for Oil and Gas Wells in the Asmari Reservoir of the Ahwaz Field [Volume 6, Issue 4, 2023, Pages 25-50]
Shirzadi, Ashkan An Analytical Poroelastic Model to Study the LCM Performance during the Wellbore Strengthening [Volume 3, Issue 4, 2020, Pages 57-74]
Shojaei, Hasan Analytical Evaluation of Sand Production Process for Oil and Gas Wells in the Asmari Reservoir of the Ahwaz Field [Volume 6, Issue 4, 2023, Pages 25-50]
Siahkoohi, Hamidreza Time domain modeling of seismic waves in visco-acoustic media with variable density and topography [Volume 6, Issue 2, 2023, Pages 11-20]
Soleimani, Amin The application of equivalent pore aspect ratio (EPAR) in detecting the pore types and determining rock types, Kangan and Dalan formations, Persian Gulf [Volume 6, Issue 4, 2023, Pages 16-24]
Soleimani, Mehrdad Discrete multiscale modelling of fractures in natural fractured reservoir, a case study from a field in the Persian Gulf [Volume 3, Issue 4, 2020, Pages 75-89]
Soleimani Monfared, Mehrdad Introducing a strategy in recognition and simultaneous modelling of fractures with FMI logs and seismic data through reservoir zonation in a field from south of Iran [Volume 3, Issue 3, 2019, Pages 14-27]
Soltanian, Hamid Field design of hydraulic fracturing in a sandstone formation (Case study: A vertical well in Hugoton gas field in the USA) [Volume 1, Issue 2, 2017, Pages 1-21]
Soltanian, Hamid Stability analysis of a vertical wellbore in one of Iran's South-West oilfields using the plastic zone concept [Volume 2, Issue 1, 2018, Pages 18-40]
Soltanian, Hamid Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]

T

Tabatabaee Moradi, Seyyed Shahab Finite element analysis to investigate the success probability of stress cage technology relative to regime of in-situ stresses for control of drilling fluid lost circulation [Volume 5, Issue 4, 2022, Pages 82-90]
Tabatabaee Moradi, Seyyed Shahab Selection of drilling fluid weight based on rock mechanics criteria: a case study in one of the south-west Iranian field [Volume 7, Issue 1, 2024, Pages 1-11]
Taghipour, Majid Investigating the effect of pore pressure increase due to gas injection on the stability of normal faults in one of the SW Iranian oil fields [Volume 2, Issue 2, 2019, Pages 30-39]
Taheri, Ehsan Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2022, Pages 19-34]
Taheri, Ehsan Treatment of relative permeability term in two-phase flow problems in porous media [Volume 5, Issue 3, 2022, Pages 84-91]
Taheri, Kioumars Correction Investigating the Design of Casing Pipes Using Drilling Data Analysis in Bangestan Wells, One of the Oil Fields in the Southwest of Iran [Volume 2, Issue 1, 2018, Pages 41-54]
Tahmasebi, Ali Improving drilling speed and cost reduction through risk management and well-trajectory design [Volume 1, Issue 1, 2017, Pages 29-39]
Talebi, Amir Determining the probability of the faults and fractures in one of the oil reservoirs based on the seismic indicators of the steering cube [Volume 6, Issue 2, 2023, Pages 21-30]
Talebi, Hossein Application of Advanced Machine Learning Models for Lithological Facies Prediction in a Southern Iranian Oilfield [Volume 6, Issue 4, 2023, Pages 81-98]
Talebi, Hossin Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2022, Pages 19-34]
Talebi,, Hossin Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
Talebian, Seyedeh Hosna Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
Taras, Yasser Separation of hydrocarbon reservoir zone using three-dimensional seismic data, wells and geomechanical parameters in one of the oil fields in southern Iran [Volume 5, Issue 4, 2022, Pages 41-53]
Tavakoli, Vahid The application of equivalent pore aspect ratio (EPAR) in detecting the pore types and determining rock types, Kangan and Dalan formations, Persian Gulf [Volume 6, Issue 4, 2023, Pages 16-24]
Tavakoli, Vahid Examining Key Factors Influencing the Accuracy of Water Saturation Calculations in Carbonate Reservoirs: A Case Study of Kangan and Dalan Formations in the Western Persian Gulf [Volume 7, Issue 1, 2024, Pages 12-24]
Tayefeh Younesi, Alireza Assesment of self-killing as a blowout control method in deep water wells [Volume 5, Issue 2, 2022, Pages 17-33]
Tokhmechi, Behzad Determination of Reservoir Drillability Index based on Drilling Penetration Rate in one oil well in south west of Iran [Volume 1, Issue 2, 2017, Pages 22-39]
Tokhmechi, Behzad Geostatistical multiple-point modeling of heterogeneous facies of petroleum reservoirs in order to control of the sand production [Volume 3, Issue 2, 2019, Pages 28-43]
Tokhmechi, Behzad New Approaches in 3D Geomechanical Earth Modeling [Volume 3, Issue 1, 2019, Pages 45-64]

U

Uromeihy, Ali Elastic properties of Carbonate Reservoir Rocks: Laboratory Measurement and Numerical Simulation using X-ray Computed Tomography Images on Kangan Carbonates [Volume 6, Issue 1, 2023, Pages 32-39]

V

Vahidi Shahir, Mohammd Hosein Experimental Investigation of Iranian Quartz Sands for Proppant Production Used in Hydraulic Fracturing Operations [Volume 2, Issue 2, 2019, Pages 69-83]
Vosoughifar, Hamidreza Oil-contamination impact on bearing capacity of strip footing placed on geocell-reinforced sand under eccentric load [Volume 6, Issue 3, 2023, Pages 58-73]

Y

Yahyaee, Farshid Geomechanical Study of One of Iranian Reservoirs: From Mechanical Earth Modeling to Mud Window Prediction [(Articles in Press)]
Yavari, Mandana Mechanisms to achieve competitive advantage of petroleum Geomechanics in first-level universities in Tehran [Volume 6, Issue 1, 2023, Pages 1-12]
Yegani, Amir Evaluation of hydrocarbon generation potential of source rocks in North Dezful region by determining the richness of organic matter using well surveying logs [Volume 5, Issue 2, 2022, Pages 56-69]
Yousefian, Hatef Stability analysis of a vertical wellbore in one of Iran's South-West oilfields using the plastic zone concept [Volume 2, Issue 1, 2018, Pages 18-40]
Yousefirad, Sasan Experimental Study of Fluid Loss Additives on Differential Sticking Probability, Case Study: Lignosulfonate & Salt saturated Muds [Volume 2, Issue 1, 2018, Pages 64-84]

Z

Zafarian, Habib alah Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2022, Pages 1-9]
Zalaki Nezhad, Ali Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2022, Pages 20-34]
Zamani, Asgar Mechanisms to achieve competitive advantage of petroleum Geomechanics in first-level universities in Tehran [Volume 6, Issue 1, 2023, Pages 1-12]
Zand, Toktam Time domain modeling of seismic waves in visco-acoustic media with variable density and topography [Volume 6, Issue 2, 2023, Pages 11-20]
Zangeneh Var, Alireza An investigation of the effects of casing erosion and cement elastic modulus on the casing collapse phenomenon: a case study on an oil field in southwest Iran [Volume 2, Issue 2, 2019, Pages 15-29]
Zargarbashi, Amir Geomechanical Study of One of Iranian Reservoirs: From Mechanical Earth Modeling to Mud Window Prediction [(Articles in Press)]